How much does it cost to install a phone jack?

National Average Range:
$120 - $180

Get free estimates from electricians near you

Get local cost

Updated: August 18, 2022

Reviewed by Adam Graham remodeling expert. Written by Fixr.com.

To provide you with the most accurate and up-to-date cost figures, we gather information from a variety of pricing databases, licensed contractors, and industry experts.

Even in the digital wireless age where most of our calls take place on cell phones, many people still want a home phone. There are several advantages to having a home phone, but it requires an installed telephone jack.

The job of installing a phone jack can be done DIY if you have the relevant skills and experience, or you can hire a professional. Costs vary depending on the jack type and installation location. The national average range for installing a telephone jack is between $120 and $180, with most homeowners paying $132 for a standard four-conductor phone jack, professionally installed.

Phone Jack Costs

Phone Jack Installation costs
National average cost$132
Average range$120-$180
Low-end$52
High-end$239

Telephone Jack Price

The technical side of telephones might seem complicated to an amateur, but it is simpler than you might think. There are two components to consider when installing a home phone: the wiring and the jack. Most telephone wires are made from twisted pairs of copper wiring, and the typical four-strand phone line has two of these pairs. Each phone only needs one pair to function. A standard four-strand telephone wire with two pairs supports two telephone lines, and a six-strand wire with three pairs supports three lines. Telephone wiring is relatively inexpensive, costing about $0.10 to $0.40 per foot.

The jacks come in three separate types: RJ11, RJ14, and RJ25. There are other jack types, but these are the most commonly used across the U.S. The RJ11 is wired to support one telephone line. The RJ14, also known as the four-conductor jack, supports two lines, and the six-conductor jack, the RJ25, is used for three telephone lines. Telephone jacks range in cost from $3 to $15, with the more functional models like the RJ25 being at the upper end of the range.

How Much Does It Cost to Install a Phone Jack

The cost of installing a phone jack has a broad cost range, depending on the size and complexity of the project and whether you hire a professional. If this is a DIY job using your own tools, it costs about $50 for the various components, including the jack, the wires, and any necessary tools required for cutting the wires and accessing the wiring box. If you already have these tools, the job can be done even cheaper. However, it is often best to hire a professional, and the total cost ranges from $110 to $250, depending on how much work is needed.

The job of installing a phone jack involves finding a location for the jack, measuring out the wiring required, checking the old wiring for any signs of damage, and potentially sawing through drywall to access the insides of the walls. The installer usually has to make a hole in the wall and slip the new wire inside, before connecting the jack at the end. The process takes a couple of hours on average, and most professionals charge around $60 to $90 per hour. For installation of a standard four-conductor jack, expect to pay about $20 in materials and $110 in installation costs for a total of $132.

Phone jack on home wall

Compare prices from telephone jack installers near you

Cost Factors Affecting the Cost of Installing a Telephone Jack

Several factors influence the cost of installing a telephone jack. The jack type affects the price because jacks with more conductors are more expensive. The amount of wiring required also impacts the price, with longer wires costing more. Another factor is whether the installer has interwall access. In new construction, they usually hook up the telephone wires and jacks before the drywall is installed, making the job much easier. In existing homes, they must drill holes into the drywall to access the interwall space, which takes more time and costs more.

Also, see if there is any existing wiring and what condition it is in. If your home already has quality wiring, the installer can make use of that and connect it to the new jack. If the wiring is damaged, it needs to be replaced. And if there is no wiring, it must be installed, leading to a larger and more expensive job.

Converting a Phone Line to Ethernet

Many modern homeowners consider the possibility of converting unused phone jacks to ethernet, allowing them to connect ethernet cables to their online devices like routers, computers, laptops, and gaming consoles to set up local area networks (LANs) and potentially boost their internet speeds. This job can be quite simple, but it depends on several factors. You may want to hire a professional installer to take on the task if you are unsure how to do it.

First, the installer will open up one of the phone jacks and investigate the wiring behind it. Most modern homes have Cat 5 or Cat 6 wiring, which is good for ethernet conversion because it means you can use those existing wires and do not need to install new ones. If the wires are not Cat 5 or 6, a new set of wires needs to be installed. Once complete, the installer will convert the cables to ethernet and switch out your old phone jacks for new ethernet adapters. You can then connect routers, computers, and other devices to these ethernet ports.

Depending on the state of the wiring in the home, number of ports required, and amount of professional work needed, the cost of converting phone lines to ethernet ranges from $150 to $300 or more.

Convert a Phone Jack to Usb

Unused phone jacks can be converted into USB power outlets, allowing you to charge devices like cell phones. Electrical hobbyists may be able to accomplish this, but other homeowners should hire a professional. The job involves using a voltage meter to test the amount of power coming through the line and then using a regulator to bring it down to 5 volts. After that, cut open the phone cord, separating the color-coded wires inside, and then connect them to the regulator before cutting open a USB cable and doing the same with its color-coded wires. Solder the wires in place and then plug your phone into the USB cable and start charging it. When done DIY, this job costs about $20, but a professional costs around $80 to $120.

Wireless Phone Jack Price

Wireless phone jacks allow you to use new phone jacks without installing new wiring. They use a transmitter and receiver that plug directly into AC outlets, making use of your existing phone line to make and receive calls wirelessly. They are useful for those who want multiple phones around the home but do not want to have to drill through the walls for each one. It can also be cheaper to install a wireless phone jack than a standard wired jack. Wireless phone jacks have a wide range of costs, mostly due to the number of features. The more features it has, the higher the cost. It is not uncommon to find a range of prices starting at $50 and going as high as $350.

Find top-rated telephone jack installers near you

Enhancement and Improvement Costs

Six-conductor Jack

A six-conductor jack supports three phone lines, rather than one or two, offering the homeowner more flexibility. These jacks are recommended for larger homes and cost a little more than standard four-conductor jacks. A six-conductor jack can be purchased for around $10 to $15.

Usb to Telephone Jack Adapter

Special adapters are also sold for connecting USB devices to telephone jacks, costing around $6 to $14 each. These adapters turn telephone jacks into USB charging stations, provided you have the correct wiring.

Additional Considerations and Costs

  • If your home does not have interwall access, the installer may have to drill through the floor or other parts of the wall to access the connection box and install the phone jacks. This requires an hour or more per jack, resulting in additional costs of $60 to $90.
  • Homes in big cities often have strong enough cell connections to rely on their cell phones for most calls. If you live in a rural area, the signal may be weaker, making phone jacks more essential.
  • Wires degrade over time, and things like rust and pests can impact the quality of your wires and eventually cause faulty connections. Professionals usually check the wires before installing a new phone jack to see if the connections are still stable. If not, completely new wiring may be needed.
  • Despite popular belief, phone lines are not required for internet service. Most cable companies connect the coaxial cable line to a specially designed modem, which converts the cable signal to an ethernet signal. This provides access to the internet without the need for a phone line.

FAQs

  • How much does it cost to install a phone jack?

Installing a phone jack generally ranges from $120 to $180 but can be more or less, depending on the job size and whether you hire a professional.

  • Who installs phone lines?

Handymen and electricians can install phone lines. They can also connect phone jacks and make any necessary repairs or enhancements.

  • Do new homes have phone jacks?

This depends on the construction, but yes, most new homes are constructed with at least one phone jack.

  • Can you turn a phone jack into an ethernet jack?

This is possible, but the wiring in your phone system may need to be replaced and special adapters installed.

  • How can I get WiFi without a phone jack?

Your cable or internet company can connect the coaxial cable to a special modem to provide your home with WiFi access.

  • Where are phone jacks usually located?

Most phone jacks are situated in the living room or near the entrance to the home.

  • How do I hide a phone jack on the wall?

There are many ways you can hide phone jacks. You can hang a chalkboard or cork board over them or place a large piece of furniture in front of them. You can also hang paintings and pictures or create custom boxes and art pieces to cover them up.​